38mm Weld Type Cupped Head Insulation Pins For Welding Capacitor
Discharge
Quick details of Cupped Head Insulation Pins
Product name :Cupped head insulation pins Material:galvanized steel Pin diameter:2.7mm Pin length :7/8" Head size:30mm Annealing: all steel pins are fully annealed unless otherwise specified. Washer: Low carbon steel & zinc plating. Cupped Head Insulation Pins simplify the permanent installation of
"Duct Liner" or other insulation materials to duct work or to other heating, ventilating or air conditioning
sheet metal configurations and housings.
A fabricated part made up of a weld pin and a staked on retaining
washer. Variations of material are available. This product is usually applied with a capacitor discharge stud
welder. Used for securing insulation. Also used as a hook-less lacing anchor to secure insulation inside fabricated
blankets. |
Specification of Cupped Head Insulation Pins
| base size | base material | pin diameter | pin length | pin material | finished |
| 20MM | mild steel, stainless steel, copper | 2.7MM,3MM, 3.4MM | 10MM, 25MM, 38MM | mild steel, stainless steel, copper | zinc/ copper plating |
| 25mm | mild steel, stainless steel, copper | 3mm | 10mm-65mm | mild steel, stainless steel, copper | zinc/ copper plating |
| 30mm | mild steel, stainless steel, copper | 3.4mm | 10mm-65mm | mild steel, stainless steel, copper | zinc/ copper plating |
| custom | custom | support custom | support custom | | |
Pic of Cupped Head Insulation Pins
 |  |
Head diameter:30mm Pin diameter:2.7mm Pin length:1" with paper washer | Head diameter:30mm Pin diameter:2.7mm Pin length:1" without paper washer |
Install of Cupped Head Insulation Pins
Recommended assembly method:
1.Work surfaces should be clean and dry, free of dust, grease, oil
and any other loose matter.
2.Remove the protective release paper taking care not to touch the
adhesive.
3.Place the hanger in the required position and press the base
against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with
fastening clips but maximum strength
of adherence is achieved after 24 hours
Packing of Cupped Head Insulation Pins
| Product | Quantity | Box size | Weight |
| 12Gauge 3/8” cup head weld pins | 1000Pcs | 26×26×8CM | 2.85KG |
| 12Gauge 7/8” cup head weld pins | 1000Pcs | 26×26×11CM | 3.5KG |
| 12Gauge 1” cup head weld pins | 1000Pcs | 26×26×11CM | 3.7KG |
| 12Gauge 1-1/8” cup head weld pins | 1000Pcs | 26×26×13CM | 4.2KG |
| 12Gauge 1-7/8” cup head weld pins | 1000Pcs | 26×26×18CM | 4.85KG |
| 12Gauge 2” cup head weld pins | 1000Pcs | 26×26×18CM | 4.95KG |
| 12Gauge 3” cup head weld pins | 1000Pcs | 26×26×18CM | 7.05KG |
| 12Gauge 4” cup head weld pins | 1000Pcs | 26×26×32CM | 7.6KG |
XY PARTS Company introuduce:
Hebei Xiangyi metal products company is a insulation
fasteners/insulation anchors manufacturing company,
we produce all kinds of insulation pins and washers.can make mold
according your drawing pic ,Our products
is as following :
CD weld pins Lacing Anchors
bimetallic pin Cup head weld pins
Quilting pins perforated base pins
self adhesive pins aluminum solar panel mesh clip
all kinds of self locking washers, Dome caps.
Special design can contact us make new mold as your pic or drawing
pic !
