Heat Preservation Plastic Frame Insulation Drive Pins For Fixing Rock Wool On Concrete Walls

Quick Details of Insulation drive pins with plastic frame

insulation fastener is a unique fastener designed for the attachment of rigid foam insulation to concrete, masonry or steel base materials. The fastener is pushed through the insulation until it touches the base material and then it is fastened in place with a Hilti powder-actuated tool. The fastener can fasten insulation panels ranging in thickness from 1" through 4-3/4". soft washer with pre-mounted powder-actuated fastener is designed for attaching thin membranes or panels to concrete base materials. The washers are 35mm and 60mm in diameter with nail lengths of 1-1/2", 1-7/8" and 2-1/2". These fasteners are installed using a Hilti powder-actuated tool.

• 1 Multiple fasteners are recommended for any attachment.
• 2 When project site base material properties are questionable, site qualification is necessary.
• 3 Based on attachment to concrete (f'c = 2000 psi - 5000 psi), grouted CMU masonry walls, or 1/8" to 1/4" thick steel (Fy = 36 to 50 ksi).

Specification details of the plastic frame insulation drive pins

TYPE1- 60MM PLASTIC BASE INSULATION DRIVE PINS

TYPE2-35MM ROUND BASE INSULATION DRIVE PINS

CR9 concrete pins are usded for fastening waterproofing membranes. Pin Material: Galvanized Steel Pin Diameter(d): 3.65mm Pin Length(c): 30mm 40mm 50mm Head Diameter(b): 8.8mm Washer Diameter(a): 35mm Suit For: P370 or P200 Tools

Applications of the plastic frame insulation drive pins

Images of plastic frame insulation drive pins

XIANGYI METAL PRODUCT LIMITED COMPANY

HEBEI XIANGYI METAL PRODUCTS CO.,LTD

Main Production-Metal Ring Mesh, Chainmail Scrubber, Metal Mesh Curtain, Instulation Fasteners, Solar panel Clips

• Pattern Design services

• Frame Design services

• Installation System Design Services

• Install parts Services

• Surface Treatment Services