• For the j hooks, the material is must choose anneaded steel wire /stainless steel wire or soft aluminum wire. it is very important for the fixing wire mesh. soft wire is easily for bending.

• For self locking washer, we must choose hardness material to make sure to lock firmly and nondeformable. at the same time, we must concider left time, so uv coated for aluminum control washer or choose stainless steel material to make rustproof.

• Does not violate panel integrity.
• solar panel clips can easily be trimmed or bent after assembly.
• Install and remove quickly and easily
• The specification can be customized
• The solar panel clips are sold separately or with the solar panel mesh

QTY used for installation:

The number of clips needed will depend on the solar panel system, below are the regular QTY.

• The QTY needed for one solar panel: A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge.
• The QTY needed for one roll: usually the length of solar panel roll is 30m, each roll is allocated with 60 clips.
• The QTY needed for a standard 3kW system (2 rows of 6 panels each - 12 panels total installed in a portrait orientation) : 35 clips.
• The distance between the clips: when install the mesh, we clips every 18 inches/450mm.

1. 100 pcs per pp bag, 80 bags per carton

2. 500pcs per pp bag, 16bags per carton

3.1000pcs per pp bag, 8 bags per carton

1. 100 pcs per pp bag, 60 bags per carton

2. 500pcs per pp bag, 12bags per carton

3.1000pcs per pp bag, 6 bags per carton